Delta AH500 series Handbuch PDF herunterladen (Seite 262)

AH500 Hardware Manual

8.1 Cautions

Before users undertake the maintenance and the inspection, they have to pay attention to the

following items. The incorrect or careless operation will lead to damage to the staff and the

equipment.

 To prevent a breakdown of an AH500 system or a fire accident, please make sure that the

ambient environment is not exposed to corrosive substances such as chloride gas and sulfide

gas, flammable substances such as oil mist and cutting powder, or dirt.

 To prevent the connectors from oxidizing, or to prevent the staff from getting an electric shock,

please do not touch the connectors.

 To prevent the staff from getting an electric shock, please turn off the power before pulling the

connectors or loosening the screws.

 To prevent the cables from being damaged, or to prevent the connectors from being loosened,

please do not impose weight on the cable, or pull them violently.

 Please make sure that the input voltage is within the rated range.

 Please do not disassemble or alter the modules. Otherwise, the products will break down, a fire

accident will occur, or the staff will be injured.

 To prevent a controlled element from malfunctioning, please make sure that the program and the

parameters are written into a new CPU module which replaces an old one before restarting the

AH500 system.

 To prevent the improper operation which results in the incorrect output or the damage to the

equipment, please refer to the related manuals for more information about operating the

modules.

 To prevent the damage to the modules, please touch metal which is grounded or wear an

antistatic wrist strap to release the static electricity from the body.

 To prevent the noise from resulting in the breakdown of the system, please keep a proper

distance from the system when using a cell phone or a communication apparatus.

 Please avoid installing an AH500 system under the sun or in a humid environment.

 To prevent the temperature of an element from being high, please make sure that the AH500

system keeps a proper distance from heat sources such as coils, heating apparatuses, and

resistors.

 To protect an AH500 system, please install an emergency stop switch and an overcurrent

protection according to the actual needs.

 Inserting and pulling a module several times may lead to the loose contact between the module

and the backplane.

 To prevent an unexpected shock from resulting in the damage to an AH500 system and a

controlled element, please make sure that the modules are installed firmly.

8.2 Daily Maintenance

To keep an AH500 system operating normally, please make sure that the ambient environment and the AH500

system conform to the cautions listed in section 8.1. Users then can undertake the daily inspection described

below. If any abnormal situation occurs, please follow the remedy and carry out the maintenance.

8.2.1 Tools Required for Inspection

 A screwdriver

 Industrial alcohol

 A clean cotton cloth

8-2

1 2 ... 257 258 259 260 261 262 263 264 265 266 267 ... 296 297

Kommentare zu diesen Handbüchern

Keine Kommentare

Delta AH500 series Handbuch Seite 262

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Aufnahmegeräte Delta AH500 series