Delta 36-650 Bedienerhandbuch PDF herunterladen (Seite 10)

INSTALLING SWITCH

AND MOTOR CORD

1. Insert switch cord (A) Fig. 13, and motor cord (B)

of the switch assembly into the opening (C) under saw

table as shown, and into the inside of the saw cabinet

Fig. 14.

2. Insert switch cord (A) Fig. 14, and motor cord (B)

into clamps (D) and loosely fasten both cords (A) and (B)

Fig. 15, to the saw cabinet by turning screws (E) Fig. 14,

clockwise. NOTE: Cords will be adjusted later. Place

switch on top of the saw table at this time.

Fig. 13

Fig. 14

Fig. 15

RECOMMENDED MOTOR FOR YOUR SAW

The motor supplied with this machine has been specially selected to best supply power to your

machine and the relative safety of the machine is enhanced by its use. We, therefore, strongly suggest

that only this motor be used, as the use of other motors may be detrimental to the performance and

safety of the saw.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Keine Kommentare

Delta 36-650 Bedienerhandbuch Seite 10