Delta RMC101 Bedienungsanleitung PDF herunterladen (Seite 916)

100

101

RMC100 and RMCWin User Manual

E-26

• If you want to take the link when the timer has not yet reached its preset, select Link if the

Timer is Not Expired. This is only useful when used with the Poll (?) command.

4. If you selected either the second or third option above, then type the preset (timeout) value in the

Timer Value text box.

5. Click OK.

Using without the Link Type and Link Value Dialog Box

1. Enter a Link Type:

• If you want to start the timer, enter 'T'.

• If you want to take the link when the timer is expired, enter 'T'.

• If you want to take the link if the timer is not expired, enter 't'. This is only useful when used

with the Poll (?) command.

2. Enter a Link Value

• If you want to start the timer, enter 0.

• Otherwise, enter the preset value in milliseconds.

See also:

DelayMS (D) link type

Poll (?) command

E.4.13 Link Type - Check Wait Bits

Link

Type:

hex 0x57, dec 87

Link

Value:

Bits that must be cleared : bits that must be set

The Check Wait Bits link type can be used to check the state of the internal wait bits that are set

or reset by either the Set and Reset Wait Bits Command or the Profibus DP spline processor. The

link value field is split into two 8 bit fields. The high 8 bits specify the wait bits that must be

cleared (0) and the lower 8 bits specify the wait bits that must be set (1). It is possible to check for

some bits to be set and others cleared while still ignoring other bits all in the same link. When the

wait bits match the conditions specified by the link value the step table will go to the next step

specified by the Link Next field.

See the Set and Reset Wait Bits Command topic for more details.

1 2 ... 911 912 913 914 915 916 917 918 919 920 921 ... 950 951

Kommentare zu diesen Handbüchern

Keine Kommentare

Delta RMC101 Bedienungsanleitung Seite 916

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Delta RMC101