Delta 50-851 Bedienungsanleitung PDF herunterladen (Seite 9)

Fig. 20

Fig. 21

Fig. 22

Fig. 24Fig. 23

3. Position open end of filter bag (A) Fig. 20, over

upper lip of support drum (E). Insert locking band (F) Fig.

20, through the loops of filter bag (A) and fasten with

clamp (G) as shown in Fig. 21. NOTE: Make certain

locking band (F) Fig. 20, is positioned in the channel of

drum (E) before fastening clamp (G) Fig. 21.

ASSEMBLING DUST INTAKE

PORT TO BLOWER AND

MOTOR ASSEMBLY

1. MAKE CERTAIN THE DUST COLLECTOR IS

DISCONNECTED FROM THE POWER SOURCE.

2. Align the four holes in the dust intake port (A) Fig.

23, with the mounting holes in the lip of flange (B) of

blower assembly, and fasten with four sheet metal

screws (C). Fig. 24, illustrates the dust intake ports (A)

assembled to the blower assembly.

4. Pull up on each retaining clip (A) Fig. 22, and insert

the dust collection bag (B) underneath each retaining clip

to hold the dust collection bag in place.

5. Place the locking clamp (C) Fig. 22 around dust

collection bag and dust collector drum and lock in place.

NOTE: Make certain locking clamp is positioned in the

channel of the dust collector drum before locking clamp.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Delta 50-851 Bedienungsanleitung Seite 9