4
Fig. 2
Fig. 3
Fig. 2
1 - Blower and motor
assembly
2 - Eight-hole rubber
gasket
3 - Ten-hole rubber
gasket
4 - Base
5 - Intake Port
Caps (3)
6 - Intake Ports
7 - Support Drum
Fig. 3
8 - Filter bag
9 - Locking bands for
filter and dust
collection bags (2)
10 - Dust collection bag
11 - Support rod
12 - Support rod
extension
13 - 5/16 - 18 x 5/8
hex head screws (48)
14 - 5/16 - 18 hex
nuts (6)
15 - 5/16 lockwashers (48)
16 - 5/16 x 7/8 O.D.
flat washers (26)
17 - M4.2 x 12 sheet
metal screws (4)
18 - Drum supports (2)
19 - Dust chute
20 - Swivel caster
assemblies (4)
21 - “U” bracket for filter
bag support rod
22 - Lower Dust Bag
retaining Clips (4)
* Har
dware not shown
* - 1/4-20x5/8" Hex Head
Screws (8)
* - 1/4" Lockwashers (8)
* - 1/4"-20 Hex Nuts (8)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
UNPACKING AND CLEANING
Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from all
unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline
or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste
wax. ILLUSTRATIONS ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING
OR ACCESSORIES AND MAY BE INTENDED TO ILLUSTRATE TECHNIQUE ONLY
22
Kommentare zu diesen Handbüchern