Delta Amplon RT Series 5-10kVA Bedienungsanleitung PDF herunterladen (Seite 12)

Amplon RT Series

Rack Mounting

z

Use the included bracket ears and screws to mount the UPS in a rack by following the proce-

dures below.

1. Attach the included bracket ears to the lateral mounting holes of the UPS. See Figure 3-a.

2. Follow steps 1 to 4 to install the UPS in Delta’s rail kit (optional). See Figure 3-b.

Stepn: Adjust the length of the rail according to the rack.

StepY: Tighten the nuts.

StepZ: Fix the rail on the rack.

Step[:

Insert the UPS in the rack and tighten the screws.

3. If you want to use a non-Delta

rail kit,

please only follow Step[.

NOTE: If you need the optional rail kit, please contact your local dealer.

Tower Mounting

z

Use the included tower stands to mount the UPS in an upright tower position by following the

steps below.

1. Stepn: Assemble the tower stands by inserting the tenons into the grooves according to

the size of the UPS. See Figure 3-c.

2. StepY: Pull out the UPS control panel and rotate it 90° clockwise. See Figure 3-d.

3. StepZ: Carefully lift the UPS upright with the Delta logo shown on the control panel facing

up. See Figure 3-e.

4. Step[: Place the UPS inside the tower stands. See Figure 3-f.

NOTE:

A minimum of two people are required to execute Step

and Step

[

z

Leave adequate space (at least 15cm) around all sides of the UPS for good ventilation.

NChapter 3: Installation

(Figure 3-a) UPS Bracket Ear

Installation

(Figure 3-b) Rack Mounting

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Keine Kommentare

Delta Amplon RT Series 5-10kVA Bedienungsanleitung Seite 12