Delta SM600 Bedienungsanleitung PDF herunterladen (Seite 7)

1. Remove the blade from the scroll saw.

2. Move the blade lever tension handle (A) Fig. 3, to the

foreword position as shown.

3. Push chuck locking lever (B) Fig. 4 to the rear as

shown. This will release the blade (C) from the upper

chuck assembly (D).

4. Insert long end (F) Fig. 5, of quickset blade changing

wrench into hole (G) in lower blade holder. This will align

wrench (H) with blade holder screw (J). Turn wrench (H)

counter-clockwise. This will release the blade from the

lower chuck assembly.

Fig. 3

Fig. 4

Fig. 5

ASSEMBLY TOOLS REQUIRED

ASSEMBLY TIME ESTIMATE

1.) 4mm hex wrench - supplied

2.) Quickset Blade Changing Wrench - supplied

3.) 10mm wrench

Less than one hour

For your own safety, do not connect the machine to the power source until the machine is

completely assembled and you read and understand the entire instruction manual.

ASSEMBLY

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Keine Kommentare

Delta SM600 Bedienungsanleitung Seite 7