Delta 50-770 Bedienerhandbuch

INSTRUCTION MANUALPortable Single-StageDust Collector(Model 50-770)PART NO. 902117 (015)Copyright © 2001 Delta MachineryESPAÑOL: PÁGINA 15To learn mor

10Fig. 19Fig. 20GROUNDED OUTLET BOXCURRENTCARRYINGPRONGSGROUNDING BLADEIS LONGEST OF THE 3 BLADESGROUNDED OUTLET BOXGROUNDING MEANSADAPTERFig. 21120 V

11OPERATING CONTROLS & ADJUSTMENTSWARNING: FOR OPERATOR SAFETY, MAKECERTAIN THE DUST INTAKE PORT IS COVEREDWITH THE VACUUM HOSE BEFORE OPERATINGTH

12OPERATIONSThis versatile dust collector is light, compact and caneasily be transported to a variety of locations for use inand out of the workshop.

13TRANSPORTATION ANDSTORAGE1. The dust collector features a convenient carryinghandle with rubber grip (A) Fig. 29, which allows the unitto be carried

14Printed in U.S.A.PARTS, SERVICE OR WARRANTY ASSISTANCEAll Delta Machines and accessories are manufactured to high quality standards and are serviced

2GENERAL SAFETY RULESWoodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain ha

3IMPORTANT SAFETY RULES FORDUST COLLECTORSWARNING:Basic precautionsshould always be followed when using your dustcollector. To reduce the risk of inju

4UNPACKING AND CLEANINGCarefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from allunpainted s

5ASSEMBLYASSEMBLING WHEELCASTERS 1. Remove the hex nut and lockwasher from each ofthe four wheel casters.2. Place the dust collector on its side.2. In

6ASSEMBLING DUSTPORTTUBE AND CONNECTOR TODUST COLLECTOR BODY1. Place tube clamp (A) Fig. 7 on the lower supporttube holder (B).2. Insert the tube supp

74. Align the two holes in the intake support angle brace(A) Fig. 10 with the two holes in the intake funnel (B).5. Fasten the intake support angle br

8ASSEMBLINGVACUUM HOSE TODUST COLLECTOR1. Place the intake cap holder (D) on the dust collectoras shown in Fig. 15. NOTE: DO NOT COVER THEINTAKE PORT

9Fig. 17 Fig. 18Fig. 19Fig. 203. Place the remaining hose clamp (A) Fig. 17, around the other end of vacuum hose (B) and slide hose (B) onto intakefun