Delta D29382 Bedienungsanleitung

PART NO. D29382 Rev. 0Copyright © 2003 Delta MachineryTo learn more about DELTA MACHINERY visit our website at: www.deltamachinery.com.For Parts, Ser

10- ENGD293824. Remove the cleaning solution application tank from the application nozzle.5. Soap mixture pressure can be adjusted by adjusting the p

11- ENGD29382BEFORE STARTING1. Move pressure washer to level ground.2. Make sure the ON/OFF switch is in the OFF positionTo reduce the risk of electro

12- ENGD293826. Connect the high pressure hose (i) to the water outlet on the unit. The wateroutlet is marked OUT.7. Assemble quick-connect adapter (k

13- ENGD29382SUCTION FILTER1. Check and clean the suction filter (b) after every 50 hours of use.When performing maintenance, you may be exposed to ho

5. Clean the nozzle using the nozzle cleaner provided or a straightened paperclip. Insert into the nozzle end and work back and forth until obstructio

15- ENGD293821. Drain all water from high pressure hose, coil it, and store it in cradle of thepressure washer handle.2. Drain all water from spray

PROBLEM16- ENGD29382Restricted, insufficient watersupply, or air in the water line.Check supply hose, faucet, andinlet screen.Do not use water from a

17- ENGD29382

18- ENGD29382WARRANTYDELTA MACHINERY warrants to the original purchaser that all products covered under this warranty are freefrom defects in material

2- ENGD29382• Water spray directed at electrical outlets orswitches, or objects connected to an electri-cal circuit, could result in a fatal electrica

3- ENGD29382• Some cleaning fluids contain substanceswhich could cause injury to skin, eyes, orlungs.• Use only cleaning fluids specifically recom-men

4- ENGD29382• Reactive force of spray will cause gun/wandto move, and could cause the operator toslip or fall, or misdirect the spray. Impropercontrol

DANGER5- ENGD29382The powerful spray from your pressure washer is capable of causingdamage to surfaces such as wood, glass, automobile paint, autostri

6- ENGD29382GENERAL INFORMATION● Congratulations! You have purchased a high quality product from America’sleading manufacturer of pressure washers.

7- ENGD29382ASSEMBLY INSTRUCTIONS2. Connect spray wand to gun. Tighten securely.3. Attach high pressure hose to gun. Tighten securely.1. Place handle

8- ENGD29382OPERATING INSTRUCTIONSBASIC ELEMENTS OF A PRESSURE WASHERHigh Pressure Pump (located inside the shroud): Increases the pressure of thewate

9- ENGD29382HOW TO USE THE CLEANING SOLUTION APPLICATION UNITNOTE: Use only soaps and cleaning solutions designed for pressure washeruse. Do not use