Delta F-25 Bedienungsanleitung PDF herunterladen (Seite 34)

Fuel Piping

Pipe Sizing - Natural Gas

1. Refer to Table 1 for pipe length and diame-

ter requirements. Based on rated ELITE

input (divide by 1,000 to obtain cubic feet

per hour).

-Table 1 is based on Natural Gas with a

specific gravity of 0.60 and a pressure

drop through the gas piping of

0.30”w.c..

- For additional gas piping sizing infor-

mation, refer to ANSI Z223.1. For

Canadian installations refer to B149.1

or B149.2.

Natural Gas Supply Pressure Requirements

1. Pressure required at the gas valve inlet

supply pressure port:

- Maximum 13”w.c. at flow or no flow

conditions to the burner.

- Minimum 5”w.c. during flow condi-

tions to the burner. Must be verified

during start up.

2. Install 100% lockup gas pressure regulator

in the gas supply line if inlet pressure can

exceed 13”w.c at any time. Adjust the lock-

up pressure regulator for 13”w.c maximum.

Pipe Sizing - Propane Gas

1. Contact the local propane gas supplier for

recommended sizing of piping, tanks and

100% lockup gas regulator.

Propane Gas Supply Pressure Requirements

1. Adjust the propane supply regulator pro-

vided by the gas supplier for 13”w.c. max-

imum pressure

2. Pressure required at the gas valve inlet sup-

ply pressure port:

- Maximum 13”w.c. at flow or no flow

conditions to the burner

- Minimum 5”w.c. during flow condi-

tions to the burner. Must be verified

during start up.

Length of Pipe

in Feet

SCH 40 1/2" 3/4" 1" 1-1/4" 1-1/2"

10 132 278 520 1050 1600

20 92 190 350 730 1100

30 73 152 285 590 860

40 63 130 245 500 760

50 56 115 215 440 670

75 45 93 175 360 545

100 38 79 150 305 460

150 31 64 120 250 380

Capacity of Pipe in Cubic Feet of Gas Per Hour

(based on 0.60 specific gravity, 0.30" w.c. pressure drop)

Table 1: Gas piping sizing - Natural Gas

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 56 57

Kommentare zu diesen Handbüchern

Keine Kommentare

Delta F-25 Bedienungsanleitung Seite 34

Kommentare zu diesen Handbüchern