Delta OIL-FREE AIR COMPRESSOR CP503 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Spülung Delta OIL-FREE AIR COMPRESSOR CP503 herunter. Delta OIL-FREE AIR COMPRESSOR CP503 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
INSTRUCTION MANUAL
PART NO. A08200 Rev. 0
Copyright © 2004 Delta Machinery
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call 1-866-422-4286.
Oil-Free
Air Compressor
(Model CP503)
ESPAÑOL: PÁGINA 21
FRANÇAIS: PAGE 41
Seitenansicht 0
1 2 3 4 5 6 ... 19 20

Inhaltsverzeichnis

Seite 1 - Air Compressor

INSTRUCTION MANUALPART NO. A08200 Rev. 0Copyright © 2004 Delta MachineryTo learn more about DELTA MACHINERY visit our website at: www.deltamachiner

Seite 2 - IMPORTANT SAFETY INSTRUCTIONS

10- ENGA08200GROUNDING INSTRUCTIONSRISK OF ELECTRICAL SHOCK. In the event of a short circuit, grounding reduces the risk of shock by providing an esc

Seite 3

11- ENGA08200Voltage and Circuit ProtectionRefer to the Parts Manual for the voltage and minimum branch circuit requirements.Certain air compressors c

Seite 4 - WARNING: Risk of Bursting

12- ENGA08200OPERATIONKnow Your Air CompressorREAD THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with you

Seite 5 - WARNING: Risk to Breathing

13- ENGA08200Before Starting Break-in ProcedureSerious damage (for units with a tank) may result if the following break-in instructions are not close

Seite 6 - WARNING: Risk of Burns

14- ENGA08200MAINTENANCECustomer ResponsibilitiesDaily or after each useBefore each use Check Safety Valve ● Drain Tank

Seite 7 - SAVE THESE INSTRUCTIONS

15- ENGA08200To Replace or Clean Check Valve 1. Release all air pressure from air tank. See "To Drain Tank" in the Maintenance section.2.

Seite 8 - SPECIFICATIONS

16- ENGA08200To Replace Regulator1. Release all air pressure from air tank. See "To Drain Tank" in the Maintenance section.2. Unplug outfi

Seite 9 - HOW TO SET UP YOUR UNIT

17- ENGA08200Performing repairs may expose voltage sources, moving parts or compressed air sources, moving parts or compressed air sources. Personal i

Seite 10 - GROUNDING INSTRUCTIONS

18- ENGA08200Regulator will not shut off air outlet.Damaged regulator. Replace.PROBLEMCAUSECORRECTIONIt is normal for "some" pressure drop t

Seite 11

19- ENGA08200PROBLEMCAUSECORRECTIONMotor will not run.Check fuse box for blown fuse and replace as necessary. Reset circuit breaker. Do not use a fuse

Seite 12 - Description of Operation

2- ENGA08200SAFETY GUIDELINES - DEFINITIONSIndicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.I

Seite 13 - How to Use Your Unit

20- ENGA08200A08200LIMITED WARRANTYDELTA MACHINERY warrants to the original purchaser that all products covered under this warranty are free from defe

Seite 14 - MAINTENANCE

3- ENGA08200IMPORTANT SAFETY INSTRUCTIONSSave these instructionsImproper operation or maintenance of this product could result in serious injury and p

Seite 15 - Before servicing:

4- ENGA08200WARNING: Risk of BurstingAir Tank: The following conditions could lead to a weakening of the tank, and result in a violent tank explosion

Seite 16 - To Replace Regulator

5- ENGA08200WARNING: Risk to BreathingWARNING: Risk of Electrical ShockHAZARDHAZARDYour air compressor is powered by electricity. Like any other elect

Seite 17 - TROUBLESHOOTING

6- ENGA08200WARNING: Risk of BurnsTouching exposed metal such as the compressor head or outlet tubes, can result in serious burns.Never touch any expo

Seite 18

7- ENGA08200Review and understand all instructions and warnings in this manual.Become familiar with the operation and controls of the air compressor.K

Seite 19

8- ENGA08200Model No. CP503Running Horsepower 1.5Bore 1-7/8"Stroke 1-1/4"Voltage/Hertz/ Phase 120/60/1Minimum Branch Circuit Requiremen

Seite 20 - LIMITED WARRANTY

INSTALLATIONLocation of the Air CompressorLocate the air compressor in a clean, dry and well ventilated area. The air compressor should be located at

Kommentare zu diesen Handbüchern

Keine Kommentare